TopSellerProducts.com

Cheetah Mounts APTMM2B Flush Tilt (1.3″ Profile) TV Wall Mount Bracket for 32-65 inch LED, LCD and Plasma Flat Screen TVs Up To VESA 684×400 and 165lbs, Including a Twisted Veins 10′ Braided High Speed with Ethernet HDMI Cable and a 6″ 3-Axis Magnetic Bubble Level

Cheetah Mounts APTMM2B Flush Tilt (1.3" Profile) TV Wall Mount Bracket for 32-65 inch LED, LCD and Plasma Flat Screen TVs Up To VESA 684x400 and 165lbs, Including a Twisted Veins 10' Braided High Speed with Ethernet HDMI Cable and a 6" 3-Axis Magnetic Bubble LevelDescription

FITS 32-65″ TVSThis mount fits essentially all 32-65″ TVs sold today. Specifically, it fits TVs with mounting holes as close as 4″x4″ or as wide as 27″x16″ (in TV terms – VESA 100x100mm to 684x400mm).LOW 1.3″ PROFILEThe APTMM2B profile is only 1.3″ for today’s thinner TVs yet still tilts to improve viewing and reduce glare. Due to the low profile, some TV’s inputs are difficult


Features

  • Fits Essentially All 32-65″ TVs up to VESA 684×400 and 165lbs
  • Flush-Tilt design is only 1.3″ from wall yet still tilts for better viewing and reduced glare
  • Stronger with Less Metal GREEN design
  • Fits 16 And 24″ Wooden Studs plus Masonry and allows for 3 degrees of Rotation Adjustment
  • Includes a Twisted Veins 10′ Braided High Speed with Ethernet HDMI cable and a 6″ 3-axis Magnetic Bubble Level

Details & Price

This product was manufactured by Cheetah Mounts LLC.

Brand: Cheetah
UPC: 887466721928
List Price: $40.99.
Used Price: $29.56 Only 5 left
New Price: $28.69 Only 12 left
Save 30% ($12.30) by purchasing on Amazon.com
5 Stars(Read Reviews)

Buy Now on Amazon.com


Tagged: , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,

Got something to say? Click here to reply

3 Responses to “Cheetah Mounts APTMM2B Flush Tilt (1.3″ Profile) TV Wall Mount Bracket for 32-65 inch LED, LCD and Plasma Flat Screen TVs Up To VESA 684×400 and 165lbs, Including a Twisted Veins 10′ Braided High Speed with Ethernet HDMI Cable and a 6″ 3-Axis Magnetic Bubble Level”

  1. Young "GoRedSox" says:

    I was skeptical of this mount. Why should this be so cheap compared to other mounting kits? I ordered one (due to the price), and prepared to return it if I did not think the mount could handle the weight of the 52″ LCD TV (Samsung).

    Once I got it, I understood the cost. Good low-cost design and built with solid heavy duty steel.
    - Two horizontal bars are load-bearing, and for proper VESA spacing, they have to be parallel and relative distance must be in the right tolerances. These are made of solid steel.
    - Two vertical bars (in the wall mount) are flimsey, and that’s ok. it should be solid enough make a rectangle box w/ square angles. That’s it.
    - Two vertical mounting (to the TV) brackets are of heavy duty metal. Making this in to two parts (not one), reduction of material, but also allows free horizontal adjustment on the TV mount.
    - By doing the above, the kit is small, uses less metal (and reduce shipping and material waste)…

  2. Chaz D says:

    I rarely write reviews, but I have been installing HDTVs for over 5 years and I am constantly getting questions from people asking which wall mount they should buy. Without exception, I refer them to Amazon and Cheetah Mounts. I’ve used over a dozen of these mounts for installations, and other than the built-in level being NOT trustworthy, this is a great mount and should work for just about any TV in the 32-65″ range. I have used this to mount anything from lighter LCD/LED displays to large heavier plasma TV’s and it supports all of them just fine. I have also used other expensive wall mounts in the past and so I can provide a comparative review.

    A lot of the reviews say the Cheetah mount looks cheap or flimsy. In comparison to the more expensive mounts, I would agree with that observation. However, when you understand the physics of what the wall mount is actually doing, you’ll realize that a bulkier mount really isn’t giving you much additional support in a fixed or…

  3. A. Thomas says:

    Just installed a 42″ Plasma in our bedroom, and here’s my take:

    This is actually a surprisingly high-quality, sturdy mount. When I took it out of the box, I was pleasantly surprised.

    Be forewarned that the directions that come with this kit are mediocre at best. The pictures are vague, and only after wrangling with this pile of metal did I figure out how this thing is supposed to be assembled and installed. Please note that the mollies included in this kit are for MASONRY, not drywall. Probably obvious to most, but again the anemic instructions may lead you down a path of destruction. I may or may not have been led down said path… :-)

    So if you’re using this in your home, here’s what you need to do: 1. Assemble the rack on the floor/table/bed/whatever, and make sure it is square. 2. Find the wall studs, and mark them lightly with a pencil. 3. Hold the mount up on the wall where you want it, and the make sure the holes (not the “obvious” 4 holes)…

Leave a Reply

  • Receive Our Latest Updates & Promotions!

  • Recent Posts

Contact Us